When you use a M252n printers with HP 201x toner cartridge for a longer time, you may meet some following questions. And I sort out some useful messages for you to read.

1. Cannot be recognized by printer. When you printer prompt "non-HP” original consumption materials, you can use it directly or press the bottom of printer to operate, and when you press the bottom "OK” or "√”, you will find your printer work again. But if you still unused your printer without any tips, you should use the eraser to wipe the chip off the chip and reinstall the machine.

2. The problem of printing quality. If you print a whole white or black paper, I suggest you to remove protective covers, seals, and stain proof plug. When you find there are some vertical white lines or black line appearing your paper, you should clean up drum corona wire and make sure the slider is in the starting position, at the same time wash up the printer laser mouth and check toner’s laser light. What’s more, you can print continuously more than twenty pieces of papers to check whether the black spot reduce or disappear, also you can fix the series problems according to the cycle confirmation. As for the problem of fixing which is not firmed, you can set the thickness of the paper and adjust the thickness paper to print.

3. The appearance has toner or toner leakage. If the situation is serious I suggest you find your sellers to exchange another one while the situation is nothing serious you can clean with your toner cartridge, after that you should check it again. Be carefully to do it, once you break 201x Toner Cartridge down, you would pay for its higher cost.

4. Printer jam. You should confirm card position. There are three cases. The first is the paper card is in the carton, not yet reach toner cartridge, it’s time for you to clean up the paper wheel of the printer to make sufficient preparation. The second case is that the paper is in the toner position, and you need to check whether the pressure paper rod on the back of drum is flexible and use your hand to push OPC or both the sides of the DR, if it turns difficult, you can confirm the toner has a problem. The last situation is maybe the front of the paper has been out of the printer, all what you should do is checking the component of machine is whether normal.

There are likely happening many problems if you don’t protect your inkesale HP 201x toner cartridge well , so learn some trips for your 201x toner cartridge protection and you will know how to do because it will come in handy someday.

Posted by: hptoners at 10:16 AM | No Comments | Add Comment
Post contains 479 words, total size 3 kb.